Characteristic determination of the cutting blades for the mechanization harvesting of agave

Authors

  • César Gutiérrez Vaca Departamento de Ingeniería Agrícola. Universidad de Guanajuato. Ex Hacienda “El Copal”. Carretera Irapuato-Silao, km 9. Irapuato, Guanajuato, México. C. P. 36820. Tel. 52 462 6245215
  • Ryszard Jerzy Serwatowski Hlawinska Departamento de Ingeniería Agrícola. Universidad de Guanajuato. Ex Hacienda “El Copal”. Carretera Irapuato-Silao, km 9. Irapuato, Guanajuato, México. C. P. 36820. Tel. 52 462 6245215
  • Oscar Alejandro Martínez Jaime Departamento de Ingeniería Agrícola. Universidad de Guanajuato. Ex Hacienda “El Copal”. Carretera Irapuato-Silao, km 9. Irapuato, Guanajuato, México. C. P. 36820. Tel. 52 462 6245215
  • José Manuel Cabrera Sixto Departamento de Ingeniería Agrícola. Universidad de Guanajuato. Ex Hacienda “El Copal”. Carretera Irapuato-Silao, km 9. Irapuato, Guanajuato, México. C. P. 36820. Tel. 52 462 6245215
  • Noé Saldaña Robles Departamento de Ingeniería Agrícola. Universidad de Guanajuato. Ex Hacienda “El Copal”. Carretera Irapuato-Silao, km 9. Irapuato, Guanajuato, México. C. P. 36820. Tel. 52 462 6245215
  • Adrián Flores Ortega Departamento de Ingeniería Agrícola. Universidad de Guanajuato. Ex Hacienda “El Copal”. Carretera Irapuato-Silao, km 9. Irapuato, Guanajuato, México. C. P. 36820. Tel. 52 462 6245215

DOI:

https://doi.org/10.29312/remexca.v4i1.1268

Keywords:

Agave tequilana Weber, harvester, cutting, blade

Abstract

In Mexico agave harvesting is done manually and it takes a crew of jimadores, and for the producers, this representing 75% of the costs of cultivation. Saldaña (2012) propose to design a machine to optimize harvest times and costs, and to provide cutting and shredding plant material destined for the production of: bioethanol, compressed material (pellets) and other byproducts. Two main activities are performed during manual harvesting: leaves and heart cuttings; for the latter, cutting blades of different characteristics have been studied to select the lowest required cutting force. An experiment was designed with independent variables; thickness of the blade (3), angle of cutting edge (2), the cutting edge side (2) and angle of attack (3), using a universal tension machine for testing. We fixed a mechanism where the blades are fastened; and when moving the set, the sample of gave is cut, recording the dependent variable force. Assays were performed on sections of agave ́s heart with uniform dimensions, conducted in 2010 at the premises of the University of Guanajuato. Using the SAS statistical package (SAS, 2001) we determined the best combination of factors evaluated in the model. The results showed that, the blade thickness 6.35 mm (1/4 inch), with a cutting edge angle of 30°, smooth cutting edge, and an angle of attack of 30° require less force to effect the cutting of the heart.

Downloads

Download data is not yet available.

Published

2018-05-31

How to Cite

Gutiérrez Vaca César, Ryszard Jerzy Serwatowski Hlawinska, Martínez Jaime Oscar Alejandro, Cabrera Sixto José Manuel, Saldaña Robles Noé, and Flores Ortega Adrián. 2018. “Characteristic Determination of the Cutting Blades for the Mechanization Harvesting of Agave”. Revista Mexicana De Ciencias Agrícolas 4 (1). México, ME:159-66. https://doi.org/10.29312/remexca.v4i1.1268.

Issue

Section

Investigation notes

Most read articles by the same author(s)

Similar Articles

1 2 > >> 

You may also start an advanced similarity search for this article.