Installation and evaluation of autonomous solar dryer for potato drying in Tarma
DOI:
https://doi.org/10.29312/remexca.v11i6.2328Keywords:
automated, autonomous solar dryer, indirect solar drying, potatoAbstract
In this work, an autonomous and automated solar dryer has been developed to dry potatoes in the town of Tarma at an altitude of 3 040 m in July 2019, which has a solar collector with two reflectors, a drying chamber with a capacity of 20 kg, photovoltaic panel and a control system. The thermal behavior of the no-load solar dryer was studied, achieving increases in the temperature in the drying chamber of up to 50.7 ±7 °C with solar radiation of 880 ±144 W m-2 h-1. The effect of pretreatment was evaluated with two concentrations of sodium bisulfite (0.02% and 0.03%) and three drying temperatures (50 °C, 55 °C and 60 °C) to evaluate the physical (L*), physical-chemical characteristics (acidity, pH) and chemicals (humidity and ash). The results showed a reduction of 70% of the water having a final humidity between 12.56% to 13.85%. Likewise, no significant difference (p> 0.05) was found between the physical, physicochemical, and chemical characteristics at the different bisulfite concentrations and drying temperatures of the Yungay potato. These potato quality parameters are in accordance with the Peruvian standard NTP 011.119 ‘potato and its derivatives: potato, definitions and requirements’, which offers an efficient alternative to dehydrated agricultural products.
Downloads
Downloads
Published
Issue
Section
License
Copyright (c) 2020 Revista Mexicana de Ciencias Agrícolas
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The authors who publish in Revista Mexicana de Ciencias Agrícolas accept the following conditions:
In accordance with copyright laws, Revista Mexicana de Ciencias Agrícolas recognizes and respects the authors’ moral right and ownership of property rights which will be transferred to the journal for dissemination in open access. Invariably, all the authors have to sign a letter of transfer of property rights and of originality of the article to Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias (INIFAP) [National Institute of Forestry, Agricultural and Livestock Research]. The author(s) must pay a fee for the reception of articles before proceeding to editorial review.
All the texts published by Revista Mexicana de Ciencias Agrícolas —with no exception— are distributed under a Creative Commons License Attribution-NonCommercial 4.0 International (CC BY-NC 4.0), which allows third parties to use the publication as long as the work’s authorship and its first publication in this journal are mentioned.
The author(s) can enter into independent and additional contractual agreements for the nonexclusive distribution of the version of the article published in Revista Mexicana de Ciencias Agrícolas (for example include it into an institutional repository or publish it in a book) as long as it is clearly and explicitly indicated that the work was published for the first time in Revista Mexicana de Ciencias Agrícolas.
For all the above, the authors shall send the Letter-transfer of Property Rights for the first publication duly filled in and signed by the author(s). This form must be sent as a PDF file to: revista_atm@yahoo.com.mx; cienciasagricola@inifap.gob.mx; remexca2017@gmail.
This work is licensed under a Creative Commons Attribution-Noncommercial 4.0 International license.
