Design, construction, verification and testing of a low cost germinator
Germinador de bajo costo
DOI:
https://doi.org/10.29312/remexca.v10i2.871Keywords:
arduino, germination, low costAbstract
Automated germinators are an indispensable tool to optimize agricultural processes. However, they have high costs, so the design, construction and operation of devices with accessible prices for small producers is required. The objective of this work was to design, build and verify a prototype of low cost germinator, under the guidelines of a prototype design. Said germinator was built using materials available in the region and is able to automatically control the temperature and photoperiod through circuits W1401 and Tem-8 48386 respectively. Furthermore, by means of simple switches, the light intensity can be controlled. Additionally, a temperature verifier was built with an Arduino Uno card. The verification system allowed the monitoring of temperature changes in real time (every minute). The prototype was tested by germinating seeds of Capsicum chinense, using different volumes of imbibition water. According to the results obtained, the built prototype is adjusted to the requirements recommended by the International seed testing association (ISTA), as well as by the Food and Agriculture Organization (FAO) for the evaluation of seeds, but also showed a higher yield, compared to a commercial incubator and even a very minor construction and operation cost.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
The authors who publish in Revista Mexicana de Ciencias Agrícolas accept the following conditions:
In accordance with copyright laws, Revista Mexicana de Ciencias Agrícolas recognizes and respects the authors’ moral right and ownership of property rights which will be transferred to the journal for dissemination in open access. Invariably, all the authors have to sign a letter of transfer of property rights and of originality of the article to Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias (INIFAP) [National Institute of Forestry, Agricultural and Livestock Research]. The author(s) must pay a fee for the reception of articles before proceeding to editorial review.
All the texts published by Revista Mexicana de Ciencias Agrícolas —with no exception— are distributed under a Creative Commons License Attribution-NonCommercial 4.0 International (CC BY-NC 4.0), which allows third parties to use the publication as long as the work’s authorship and its first publication in this journal are mentioned.
The author(s) can enter into independent and additional contractual agreements for the nonexclusive distribution of the version of the article published in Revista Mexicana de Ciencias Agrícolas (for example include it into an institutional repository or publish it in a book) as long as it is clearly and explicitly indicated that the work was published for the first time in Revista Mexicana de Ciencias Agrícolas.
For all the above, the authors shall send the Letter-transfer of Property Rights for the first publication duly filled in and signed by the author(s). This form must be sent as a PDF file to: revista_atm@yahoo.com.mx; cienciasagricola@inifap.gob.mx; remexca2017@gmail.
This work is licensed under a Creative Commons Attribution-Noncommercial 4.0 International license.