Determination of some physical properties of Agave tequilana Weber for mechanizing crop

Authors

  • Alberto Saldaña Robles Departamento de Ingeniería Agrícola. Universidad de Guanajuato. Campus Irapuato-Salamanca. Ex-Hacienda “El Copal”. Carretera Irapuato-Silao, km 9. Irapuato, Guanajuato, México. C. P. 36820. Tel. 52 462 6245215
  • Ryszard Jerzy Serwatowski Hlawinska Departamento de Ingeniería Agrícola. Universidad de Guanajuato. Campus Irapuato-Salamanca. Ex-Hacienda “El Copal”. Carretera Irapuato-Silao, km 9. Irapuato, Guanajuato, México. C. P. 36820. Tel. 52 462 6245215
  • Noé Saldaña Robles Departamento de Ingeniería Agrícola. Universidad de Guanajuato. Campus Irapuato-Salamanca. Ex-Hacienda “El Copal”. Carretera Irapuato-Silao, km 9. Irapuato, Guanajuato, México. C. P. 36820. Tel. 52 462 6245215
  • César Gutiérrez Vaca Departamento de Ingeniería Agrícola. Universidad de Guanajuato. Campus Irapuato-Salamanca. Ex-Hacienda “El Copal”. Carretera Irapuato-Silao, km 9. Irapuato, Guanajuato, México. C. P. 36820. Tel. 52 462 6245215
  • José Manuel Cabrera Sixto Departamento de Ingeniería Agrícola. Universidad de Guanajuato. Campus Irapuato-Salamanca. Ex-Hacienda “El Copal”. Carretera Irapuato-Silao, km 9. Irapuato, Guanajuato, México. C. P. 36820. Tel. 52 462 6245215
  • Salvador García Barrón Departamento de Ingeniería Agrícola. Universidad de Guanajuato. Campus Irapuato-Salamanca. Ex-Hacienda “El Copal”. Carretera Irapuato-Silao, km 9. Irapuato, Guanajuato, México. C. P. 36820. Tel. 52 462 6245215

DOI:

https://doi.org/10.29312/remexca.v3i3.1441

Keywords:

Agave tequilana Weber, harvester, unitary energy, agricultural machinery

Abstract

In this study some physical properties (dimensions and weights) of Agave tequilana Weber plant were determined and of their individual elements (pineapple, leaves and root) using basic measuring devices, as well it was measured unitary energy required for leaves cut. These parameters would be used in the design of agave’s harvester-shredder. The study was made at “El Copal”, municipality of Irapuato, Guanajuato, Mexico. To quantify unitary energy two parameters were assessed. The firs parameter was energy used during agave leaf cut this energy was assessed in 10 positions along 1m length leaf, making four repetitions. A device which applies free falling was used. The second parameter was transversal section area, in the same positions were cut energy where made in leaf, using artificial vision. From this information unitary energy was calculated, giving as result an average of 2.5 J·cm-2. The physical properties assessed have high variability. Mean of these results coincides with the values obtained by other authors. It was found that there is well defined relation between: cut energy, leaf transversal section area and position along leaf, in the extent that one of the variables increases the other increases according to second order polynomial.

Downloads

Download data is not yet available.

Published

2018-07-11

How to Cite

Saldaña Robles Alberto, Ryszard Jerzy Serwatowski Hlawinska, Saldaña Robles Noé, Gutiérrez Vaca César, Cabrera Sixto José Manuel, and García Barrón Salvador. 2018. “Determination of Some Physical Properties of Agave Tequilana Weber for Mechanizing Crop”. Revista Mexicana De Ciencias Agrícolas 3 (3). México, ME:451-65. https://doi.org/10.29312/remexca.v3i3.1441.

Issue

Section

Articles

Most read articles by the same author(s)